Water Heaters – How to clean it out annually (Its FREE and saves MONEY)
Tweet10 years ago
There is nothing more frustrating than turning on the hot water in your shower and instead receiving cold water. Water heaters, like other appliances, need maintenance to increase longevity and reduce the possibility of damage.
Water has sediment suspended in it, and as the water sits in your water heater, these particles will often settle to the bottom of the tank, causing damage to the floor of your water heater. At least once per year, drain the water from your water heater and clean the inside surface of its floor.
1. To drain your water heater, first turn off the water supply and power to the water heater. For electric water heaters, turning off the power means that you simply flip the circuit breaker to the “off” position. For gas water heaters, turn the thermostat setting to the pilot position.
2. Connect a water hose to the drain fitting at the bottom of the tank and put the other end in a place, such as your driveway, where the draining hot water won’t cause any damage. A typical garden hose is a direct fit to the drain fitting.
3. Turn on all the hot water faucets in your home and then open the drain valve on the water heater.
4. Turn the water supply back on (with the drain valve still open) to remove any built up sediment in the bottom of the tank.
5. Close the drain valve, refill the tank, and turn the power back on. This can be a little tricky for older water heaters as the drain valve may stick or be plugged.
If either of these is the case and you cannot get it to drain, give us a call and we can fix it for you.